CST 2/4/8/16區英文版多線火警控制器ck1000火警面板
主要針對出口,遠銷全球各地。
This series of panels are basically the same in application and operation, their differences are shown in Table 1-1. PANEL will be described as the example in the following sections.
Table 1-1
FACP | Number of Detection Zones | Number of Sounder Outputs | Output Delay Settings |
PANEL-4 | 2/4 | 1 | N/A |
PANEL-8 | 8 | 2 | N/A |
PANEL-16 | 16 | 4 | N/A |
1.1 Product Features
l 4,8,16 Class B Initiating Device Circuits (IDCs)
? All zones accept conventional detectors and any normally open contact device
l Four Class B Notification Appliance Circuits (NACs)
l One Form-A Alarm Relay
l One Form-A Trouble Relay
l One Form-A Supervisory Relay
l 3.0 amps of system power?
l Max 20 conventional detectors in one zone.
l Auto/Manual mode setting enable walk test.
l Each Zone can be disabled,
l Sound output can be disabled.
l Manual active sound output enabled.
l Able to report short and broken circuit of detection zones.
l Designed with standby batteries and space provision for two sealed lead-acid batteries.
l Testing and disable functions.
l Can connect max 32 repeater panels by RS485 communicaiton port
AC Power?
90-270 VAC, 50 Hz, 2.3 amps
Wire size: minimum #14 AWG (2.0 mm2) with 600V insulation
Battery (lead acid only)?
Maximum Charging Circuit: Normal Flat Charge—27.6V @ 0.8 amp
Maximum Charger Capacity: 18 Amp Hour batter
Sound Output Device Circuits?
General Alarm Zones 1 through 16
Operation: All zones Class B
Normal Operating Voltage: Nominal 24 VDC (ripple = 100 mV maximum)
Alarm Current: 15 mA threshold
Short Circuit Current: 42 mA maximum
Maximum Loop Resistance: 100 ohms
End-of-Line Resistor: 4.7K, ? watt
Detector Loop Current is sufficient to ensure operation of two alarmed detectors per zone
Standby Current: 7.26 mA
Three Relays Output
Relay contact rating: 2.0 amps @ 30 VDC (resistive), 2.0 amps @ 30 VAC (resistive)
Nonresettable 24 VDC Power?
Maximum ripple voltage: 10 mVRMS ? ? ? ? ?Operating Voltage nominal 24 volts
Total DC current available from this output is up to 500 mA?
Recommended maximum Standby current is 150 mA
深圳市鎧衛安全技術有限公司
111
深圳鎧衛安全技術有限公司是專門從事消防、安防電子安全產品的研發、生產、貿易為一體的專業化電子公司,產品以外銷為主。
?????公司以:團結、盡責、高效、創新為企業精神,注重企業文化和企業形象,堅持“品質為上”的經營原則,嚴格控制產品質量,爭創行業**品牌。
?????公司生產的全過程,從原材料的采購、進貨檢驗,工序控制,成品檢驗到產品交付、直至售后服務都嚴格遵照***質量保證體系中的有關規定實施控制。設有完善的信息反饋處理網絡,對產品的各項指標均按國家或行業標準嚴格測定。
?????公司以:誠信、專業、快速、**為企業服務理念。公司以優越的產品性能、價格比,與廣大工程商、經銷商建立了良好的合作伙伴關系。
?????產品通過公安部安全與警用電子產品質量中心檢測并獲得歐盟的CE認證,遠銷歐洲、美洲、非洲、澳洲及中東地區,深受廣大客戶好評。



