提升速度：＞1.2m/s

     Lift speed: ＞1.2m/s

3.8  提升機功率 ：≥7.5 kW

    Power of the bucket elevator: ≥7.5 kW

3.9  分離器分離量 ：≥90 t/h

    Seperating quantity of bucket elevator: ≥90 t/h

3.10  分離區風速：4,000-5,000mm/s

    Air speed in the seperative zone: 4,000-5,000mm/s

3.11  輸送器輸送量：≥90t/h

    Conveying quantity of the conveyor:  ≥90t/h

3.12  輸送器功率 ：4kW

    Power of the conveyor：4 kW

3.13 小除塵通風量 ：5000 m3/h

     Small dust collect required ventilation capacity : 5000 m3/h

     風機功率：5.5kW

Power of the fan：5.5kW

     彈丸風力回收風機風量: 120000 m3/h

     Air blower capacity for abrasive recovery: 120000 m3/h

     風機功率：90kW

Power of the fan：90kW

3.14 拋頭輸送系統  Blast wheel transport system

    輸送速度（在直徑1米的鋼管尺寸）：0～2m/min(變頻調速)

 Transport speed at steel pipe diameter is 1 meter  : 0～2m/min(Frequency conversion)

減速機功率：3kW    Reducer power : 3kW

3.15 鋼管移動小車 steel conveying flatcar

輸送速度：0～20m/min(變頻調速)

Transport speed : 0～20m/min(Frequency conversion)

減速機功率：2.2kW *3   Reducer power : 2.2kW*3

3.16 彈丸皮帶機供丸系統

     Belt conveyor abrasive supply system

     供丸量：200－900kg/min    abrasive supply capacity: 200－900kg/min

 減速機功率：2.2kW    Reducer power : 2.2kW

3.17鋼管自轉系統

     Pipe rotation system

 自轉速度：0～20m/min(變頻調速)u Repairing Advanced high efficient impeller unit is easy,wear-resisting and longer life.

u 清理室內護板用耐磨遮蓋包鑄螺母栓接，保護螺栓頭部不易損壞，拆裝維修方便，護板及螺母使用壽命長，維修量小。

u The lining is fasten by wear-resisting covered screw cap in the cleaning room,so as to protect the head of screw to avoid damage,repack is convenient.life of lining and screw cap is longer,almost without repair.

u 采用國內生產的**電氣元件，操作使用簡單，運行靈敏可靠。

u Adoping civil advanced electrical component, operate simply and run sensitively, stably.

3.3、設備技術參數

   Techinology parameter of the equipment

1．鋼管拋丸機主要用于去除鋼管內表面的銹蝕及氧化皮，獲得一定粗糙度的金屬本色表面。

   Steel pipe inner wall shot blast machine serve as cleaning away the scale and rust,which can get the primitive surface with certain rough degree.

2.被清工件的主要參數 ：

  Parameters of cleaned workpiece

2.1．長度（mm） ： 12000

     Length(mm):    12000

2.2．管徑（mm）: ￠500-1200

     Diameter of the pipe  ￠500-1200

3.技術特征：

     Technology Features:

3.1．具有一次性可以同時清理1根鋼管功能。

     It can clean the 1 steel pipe at the same time .

3.2．清理速度范圍：0.5～3.5 m/min （根據管徑不同速度可無級調速）

     Range of cleaning speed: 0.5～3.5 m/min (Stepless speed adjusted according to the diameter)

3.3．拋丸器拋丸量：≥300 －800kg/min

     Shot quantity of the impeller unit: ≥300－800 kg/min

3.4．液壓站功率：≥110kW

Power of the hydraulic station: ≥110kW

3.5  拋丸器數量：2臺

     Quantity of the impeller unit:  Two sets.

3.6  提升機提升量：≥90 t/h

     Quantity of the bucket elevator: ≥90 t/h