產品簡介?
NAMOA-30KV氧化鋅避雷器直流參數測試儀是專門用于檢測10kV及以下電力系統用無間隙氧化鋅避雷器NAMOA閥電間接觸不良的內部缺陷,測量MOA的直流參考電壓(U1mA)和0.75U1mA下的泄漏電流。
產品別名
NAMOA-30KV氧化鋅避雷器直流參數測試儀、NAMOA-30型智能型氧化鋅避雷器測試儀、NAMOA-30氧化鋅避雷器檢測儀、NAMOA-30氧化鋅避雷器測試儀、氧化鋅避雷器直流泄露測試儀
產品特性
1、全自動測量,操作方便、快捷。
采用自動控制原理對1mA電流和0.75倍直流參考電壓進行精密的閉環調整,采用微電腦控制測量過程,只需要按一個按鈕就可以自動的測量氧化鋅避雷器1mA時的直流參考電壓和0.75倍直流參考電壓下的泄露電流,整個過程只需15秒,十分適合批量測量。
2、一體化結構,體積小,重量輕。
NAMOA-30KV氧化鋅避雷器直流參數測試儀將直流高壓電源、測量和控制系統組成一體,全部元件濃縮在一個機箱內,具有體積小,重量輕等特點。
3、特別工藝設計,接線簡單。
產品參數
測量范圍 | 電壓 | 0~30kV |
電流 | 0~1000μA | |
測量精度 | 電壓1% | |
環境溫度 | 0℃~+40℃ | |
相對濕度 | 25℃時≤85% | |
海拔高度 | <1000m | |
電源電壓 | 220V±10% | |
電源頻率 | 50±1HZ |
Product introduction
NAMOA-30KV Oxide Arrester (MOA) Tester special applies to test gapless arrester MOA bad contact internal defects of power systemunder10KV. Measuredthe leakage current under DC reference voltage (U1Ma) of MOA and 0.75 U1mA .
Also called?name
Arrester tester, zinc oxide arrester characteristics tester, NAMOA-30KV arrester DC parameter tester
The Characteristics of the products
1. Auto to measure, easy and fast to operate.
closed-loop high precision adjustment for 1mA current and 0.75 times DC reference voltage using principle of automatic control,adoptsmicro computerto control the measurement process, only press on button is ok, the whole process in 15 seconds, very suit for mass measurement.
2. Integral structure, small in volume ,light in weight
This device composed by DC HV power source, measuring and controlling
system, all components in one case, small in volume, light in weight .
3. Special design, easy to connect wire.
The parameters of the products?
1. Rated output: voltage:0~30kV
?????????????current:0~1000μA
2. Accuracy : voltage 1%
3. Temperature :0~+40℃
4. Relative humidity:≤85% (25℃)
5. Altitude :< 1000M
6. Supply voltage: 220V±10%
7. Power frequency: 50±1HZ