產品簡介?

NA3571接地電阻測試儀適用于電力、郵電、鐵路、通信、礦山等部門測量各種裝置的接地電阻以及測量低電阻的導體電阻值；NA3571接地電阻測試儀還可測量土壤電阻率及地電壓。

產品別名

接地導通測試儀、接地電阻測試儀、醫用接地電阻測試儀、數字接地電阻測試儀

產品特性?

·NA3571接地電阻測試儀結構上采用高強度鋁合金作為機殼，電路上為防止工頻、射頻干擾采用鎖相環同步跟蹤檢波方式并配以開關電容濾波器使儀表有較好的抗干擾能力。

·采用DC/AC變換技術將直流變?yōu)榻涣鞯牡皖l恒定電流以便于測量。

·允許輔助接地電阻在0~2KΩ（RC），0~40KΩ（RP）之間變化，不致于影響測量結果。

·NA3571接地電阻測試儀不需人工調節平衡，3(1/2)位LCD顯示，除測地電阻外，還可測低電阻導體電阻、土壤電阻率以及交流地電壓。

·如若測試回路不通表頭顯示“1”代表溢出，符合常規測量習慣。

產品參數

Product introduction?

The Digital Earth Resistance Tester abandon the traditional hand generate working method, use advanced large scale integratedcircuits,apply to DC /AC conversion technology, which combine the three terminal and four terminal measurement models into a new earth resistance measuring instrument.

Operation principle:

Transform DC into AC low frequency constant current by build-in DC / AC converter, then through the auxiliary earth electrode Candtested object Eform a circuit, it will generate AC voltage drop on the measured object, through the auxiliary ground electrode P send into AC amplifier to magnify, and through the detector intothemeter to display.By using the multiplying power, can get three different range: 0~2Ω, 0~20Ω, 0~200Ω.

This tester applies to measure ground resistance of various devices and low resistance conductor resistance inelectricity,telecommunications,railways, telecommunications, mining and other sectors; This tester also can measure soil resistivity and ground voltage.

Also called?name

Ground continuity tester, ground resistance tester, Medical Ground Resistance Tester

The Characteristics of the products

1.Adopt high strength aluminum alloy case, in order to prevent power frequency and radio frequency interference, it usephase-lockedloop synchronouslytracking detecting method, and also equip with switching capacity filter, that make the tester with high anti-jamming capability.

2.Adopt DC / AC conversion technology, change DC to AC low frequency constant current, in order to measure.

3.Allow the earth resistance changing between 0~2KΩ(RC) and 0~40KΩ(RP), it does notaffectthe measured result.

4.No need to regulate balance artificially, 3(1/2) bit LCD display, not only can measure the earth resistance, but also can measurelowresistanceconductor resistance, earth resistivity and AC earth voltage.

5.If measure the test loop fails, the meter shows "1", means overflow, that conform to the standard habit of measurement.

The parameters of the products?

1. Operation condition

Temperature:0℃~+45℃

Relative humidity: ≤85%RH

2. Measurement range and constant current value (Valid value)

??Resistance: 0~2Ω(10mA), 2~20Ω(10mA),20~200Ω(1mA)

??Voltage: AC ?0~30V

3. Measure accuracy and resolution

??Accuracy: 0~0.2Ω≤±3%±1d

??0.2Ω~200Ω≤±1.5%±1d

??1~30V≤±3%±1d

Resolution: 0.001Ω, 0.01Ω, 0.1Ω, 0.01V

4. Auxiliary grounding resistance and error caused by grounding voltage

·Allowed auxiliary grounding resistance RC( between C1 and C2)<1.8KΩ;

??RP( between P1 and P2)<40KΩ, Error≤±5%

·Allowed grounding voltage≤5V (power frequency valid value)?error≤±5%

5. Power and power consumption

Max power consumption ≤2W

Power supply: 6.8V~9V (7 5#rechargeable battery group), external AC 220V power source.

Dimension: 220×200×105mm(LWH)

Weight:≤1.4kg

Product information

1, be sure to read this before using the manual, and follow the instructions steps accordingly.

2, do not use non-original accessories provided, to avoid danger.

3, test equipment must be grounded.

4, the operator must be familiar with the operating procedures of the tester before use.

5, do not adjust other button during the whole measurement process.

6, completed the test, make sure all in the reset mode before removing the wiring.

7, do not block slit or vents, ensuring the cooling effect of the instrument function well,.

8, avoided in the following environments:

(1) Avoid direct sunlight, rain or moisture;

(2) Keep away from fire and heat;

(3) Must shut down and remove the power cord before handling or maintenance.