| ITEM | MH-630 |
| Capacity | Dimensions | 630 × 630 (24.8 × 24.8) |
| Bolt hole | M16 × 2 |
| Max. loading capacity | 1200 kg (Uniform distribution) (2640 lbs) |
| B minimum indexing (degree) | STD:1°; OPT: 0.001° |
| Index repeatability | ± 4” |
| Pallet capacity | 2 |
| Travel Range | Max. travel range of X/Y/Z-axis | 1000 / 800 / 750 (39.4 / 31.5 / 29.5) |
| Distance from spindle nose to table center | 200-950 (7.9-37.4) |
| Distance from spindle center to table surface | 50-850 (2.0-33.5) |
| Spindle | Spindle taper | ISO No. 50 |
| Spindle nose outer diameter | ? 100 (? 3.9) |
| Spindle speed | 45~6000 rpm (3-step gear) |
| Feedrate | Cutting feedrate of X/Y/Z-axi | 1 -5000 mm /min (0.04-197 ipm) |
| Rapid traverse speed of X/Y/Z-axis | 20 m /min (787 ipm) |
| Minimum setting unit of X/Y/Z-axis | 0.001 |
| Feedback element | Optical scale |
| Tool | Tool capacity | STD: 60 pcs; OPT: 80 pcs |
| Tool selection | Shortest path |
| Max. adjacent tool diameter × length | ? 140 × 450 Max. tool diameter ? 230 |
| Max. tool weight | 20 kg (44 lbs) |
| Tool shank type | BT50. CAT50. |
| Drive Motor | Spindle motor | 15/18.5 kW (20 / 24.8 HP) |
| Servo motor of X/Y/Z/B-axis | 4 / 4 / 7 / 1.6 kW (5.4 / 5.4 / 9.4 / 2.1 HP) |
| Spindle recirculating lubrication motor | 370 W |
| Centralized lubrication system | 12 W |
| Hydraulic motor | 5.5 kW (7.4 HP) |
| Coolant motor (for tools/chips) | 0.75 / 1.5 kW |
| Chip conveyor motor | 0.1 kW × 2 (1/8HP × 2) |
| ATC motor | 2.2 kW |
| Chain type chip conveyor + Chip bucket | Hydraulic |
| Accuracy | Positioning | ±0.004 |
| Repeatability | ±0.003 |
| Miscellaneous | T-T (sec) | 8 |
| P-P (sec) pallet to pallet | 18 |
| Outline dimensions (W × H × D) w/80-tool | 6238 × 2950 × 2950 (246 × 116 × 116) |
| Packing size (W × H × D) w/80-tool | 7300 × 3365 × 3530 (287 × 132 × 139) |
| Net weight (approx.) w/80-tool | 17200 / 3250 kg (37840 / 7150 lbs) |
| Gross weight (approx.) w/80-tool | 21700 / 3550 kg (47740 / 7810 lbs) |
企業特殊行業經營資質信息公示
點擊圖片查看原圖
