企業特殊行業經營資質信息公示
營業執照已認證 
點擊圖片查看原圖
NEW LINE FOR PROCESSING ConTINUOSLY AND MAKING A TUBULAR FORM FROM A FLAT FELT.
This line consits of un-winding openwidth felt with infeed on an axial device (jumbo roll), prepare the felt
in atubular form, close the tubular by welding with hot air and delivery the tubular folded, out of a vertical
conveyor belt operation to be repeated several time in order to obtain a complete product multylayer.
Automation of process as follows:
- Un-winding operation through a pneumatic brake controlled and synchronized by optic laser.
- Fabric guides to delivery the felt in tubular form from un-winding station to the sealing station.
- Welding device multipurpose for “overlap welding”, “straight edge welding”, “silicon strip” welding, “felt strip welding”.
- Automated sequence and memorization of receipt with the control of temperature, blowing, speed.
- Wo*ng width (for open width felt): up to 5.400mm.
TECHNICAL CH***CTERISTICS:
Modular construction with axial unwinding for heavy rolls and tangential winding.
Special motorization with directional inverter with constant reading of diameter of roll
and synchronization with electronic sensor.
Adjustable and automatic control of roll compactness.
Electronic metering with automatic stop at the length required.
--
--
TECHNICAL DETAILS:
Wo*ng width up to 6.000 mm.
Variable speed up to 300 mt/min according to the
kind of fabric
Unwinding roll diameter up to 1.800 mm.
Winding roll diameter up to 1.200 mm.
PLC integrated for full automation
Minimum cutting size 30 mm.
Adjustable shaft to support the unwinding roll with
diameters on demand 2”, 3”, 4”, 5”, 6”.
--
-----
特殊氈制品生產線/felt line
從開幅到圓筒氈制品新型連續型生產線
這條生產線的組成由，入口處軸放卷，準備成圓筒形，
熱風粘合，立體輸送機，重復幾次可得到多層氈制品。
自動化程度如下：
－ 退卷通過一個氣動殺車及光學激光器來控制同步。
－ 面料從退卷站以筒狀的形式運送到縫合站。
－ 粘合裝置具有多功能，如搭接焊接，直邊焊接，硅條式焊接，氈條式焊接。
－自動排序，并記憶工藝的控制溫度，吹風和速度。
－工作門幅（開幅）：高達5.4米。
氈布分切機/Filt slitting machine
氈布分切機
技術特點：
- 模塊化結構。
- 可調節，自動控制面料松緊度。
- 特殊監控系統，直接控制變頻器，實時讀取布卷
直徑，由電子傳感器控制同步。
技術參數：
- 工作門幅可達6米。
- 根據面料種類車速可達300米每分。
- 退卷直徑可1.8米。
- 打卷直徑可達1.2米
- 最小分切寬度30毫米。
- 支撐退卷的軸直徑根據要求可做成2/3/4/5/6英寸。
