企業特殊行業經營資質信息公示
營業執照已認證 
點擊圖片查看原圖
DOTCOAT – THERMOPLAST ADHESIVE SYSTEMS 德奧特－熱塑性粘合系統
POWDER SCATTERING 熱塑性粘合系統
FLAT BED LAMINATION 平板復合
3
上海代表處：張先生，137 6133 5365 dotcoat@126.com
A rotating, structured roller is filled with thermoplastic
powder. Depending of the required
coating weight, the rotation speed is adjusted.
Right after, an oscillating brush empties the
roller and this way, the volumetrically dosed
powder falls onto the substrate passing
underneath.
一個結構化的轉動的棍子裝有熱塑性粉沫。
根據涂層克重的不同，棍子轉速是可以調整
的。然后，一根震蕩刷清空這根棍子，這樣
粉末灑落在下方經過的基布上。
In order to coat or laminate various substrates, the
material is transported between two belts through a
heating section. This way, the thermoplastic adhesive,
applied before the machine in form of powder, webs
or films is melted. Most often, the heating section is
followed by a calandering unit and a cooling section.
This way, the liquified adhesvie is squeezed into the
surfaces where it solidificates by cooling and thus
glues the substrates together.
為了涂布或復合多種基材，材料被兩條皮帶運輸通過
一個熱區，這些熱塑粘合劑在進入機器前通常是粉沫
狀，網狀或膠片狀。通常在熱區后跟一個壓光單元和
冷卻區。粘合在些被擠進基材表面并冷卻固化，從而
使基材粘合在一起。
