? ? ? ? ? ? ? ? ? ? ? ? ? ? 華測海綿泡沫疲勞壓陷試驗機 HCPL-2000

產品型號: HCPL-2000

一、華測海綿疲勞壓陷試驗機主要適用范圍及功能：

? ? ? 本機按照國標ISO 3385.1989標準要求設計制造。泡沫壓縮疲勞試驗機主要用于泡沫聚合材料的往復壓縮試驗，測定殘余變形率。由此可以了解材料的動態疲勞特性?？梢詽M(mǎn)足我國汽車工業標準QCT56-93《汽車座椅襯墊材料性能試驗方法》。日本汽車工業標準JASOB408-84等國外標準的要求。
二、華測海綿泡沫疲勞壓陷主要技術參數:?
1、 **試樣負荷： 2kN.
2、往復壓縮次數: ?70次/分.
3、往復壓縮行程: ?**100mm.
4、壓盤直徑：φ250 mm ， 下邊緣具有25mm的圓角 。
5、頭 ?數: ?二頭（二組壓板，一次可同時試驗二個試樣）
6、計數0~999次
7、電源：Ac220 50HZ 3A
結構原理:
? ?泡沫壓縮疲勞試驗機由曲柄連桿驅動機構，速度控制單元及自動記數控制單元組成。這些部分均裝在一個整體內。
主機采用雙立柱門式框架，底座內裝有曲柄連桿驅動機構、驅動電機，速度控制單元及自動記數控制單元。通過調節曲柄連桿驅動機構的偏心距，可以調節往復壓縮行程。記數器為數字式顯示，可直接顯示往復次數，并能設定往復次數，到達設定值時可自動停車。
三、華測海綿疲勞壓陷試驗機主要配置
? ?1、測試主機一臺
? ?2、輪輻式高精度傳感器一支
? ?3、主機測試夾具一套
? ?4、調速電機系統一套
? ?5、電氣控制箱一臺
? ?6、產品說明書一份
? ?7、產品合格證一份
? ?8、產品裝箱單一份




相關產品
海綿泡沫其它試驗儀器?
海綿落球回彈試驗儀
海綿泡沫切割機
海綿疲勞壓陷試驗機
海綿壓縮**變形試驗機
海綿壓陷硬度測定儀
















Sponge foam indentation fatigue testing machine
Product type: HCPL-2000
A sponge, fatigue pressure testing machine is mainly applicable scope and function:
The machine is in accordance with the national standard ISO 3385.1989 standard requirements of design and manufacturing. Compression fatigue testing machine is mainly used for reciprocating foam polymeric material compression test, determination of residual deformation rate. From this we can know the dynamic fatigue property of materials. To meet the QCT56-93 "automobile industry standard of China car seat cushion material performance test methods". The Japanese auto industry standard JASOB408-84 and other standards.
Two, the main technical parameters:
1, the maximum sample load: 2kN.
2, reciprocating compression times: 70 times per minute.
3, reciprocating compression stroke: the maximum 100mm.
4, disc diameter: diameter of 250 mm, with 25mm rounded edge.
5, heads: two (group two plate, can test two samples at the same time a)
6, counting 0~999 times
Power supply: Ac220 7, 50HZ 3A
The structure principle:
Compression fatigue testing machine is composed of a crank connecting rod mechanism, a speed control unit and automatic counting control unit. These parts are installed in a whole.
Adopts double column gantry frame, the base is equipped with a crank connecting rod mechanism, a driving motor, speed control unit and automatic counting control unit. Through the eccentric crank connecting rod drive mechanism can adjust the distance, the reciprocating compression stroke. Register for a digital display, can display the reciprocating frequency, and can set the reciprocating frequency, can automatically stop when reaching the set value.
Three, sponge fatigue pressure testing machine configuration
1, test a host
2, spoke a high precision sensor
3, a host test fixture
4, motor speed control system
5, the electric control box
6, a product specification
7, product certificate
8, product packing list
Related products
Sponge foam other test instrument
Sponge ball rebound tester
Sponge foam cutting machine
Sponge fatigue indentation test machine
Compression testing machine sponge
Sponge indentation hardness tester